Fatty spew on leather

If you’re seeing a whitish or brownish coating on your leather and thinking, “Uh-oh, is that mold?”, take a breath! What you’re likely looking at is fatty spew – also known as spew or fat bloom. This is a natural occurrence where fatliquors used during the tanning process from within the leather migrate up to the surface, solidify upon contact with air, and create a waxy coating. And while it might look concerning, it’s easy to handle with the right steps!

What Causes Fatty Spew?

Fatty spew can arise from fats in the leather or oils used during tanning and rehydration. This sneaky wax can show up weeks after production and often occurs when items are packed in plastic in humid areas, “sweating” out these oils on long trips.

Quick Check Tip: Unsure if it’s fatty spew or mold? Just run a hair dryer over the area. If it melts and vanishes, it’s fatty spew. Mold, however, stays put.

How to Handle Light Fatty Spew

For light cases, take a hair dryer, apply gentle heat, and watch the fatty spew disappear as it melts. If it reappears, just repeat the process for a quick refresh.

Dealing with Moderate Fatty Spew on Water-Resistant Leather

For more noticeable spew that’s not easily handled by quick warming, here’s your go-to method:

  1. Clean: Start with Geist Rapid Leather & Vinyl Cleaner. Spray a bit on a cloth, wipe down the surface, and let the cleaner get rid of any dirt and oils on top.

  2. Degrease: Follow up with Geist Degreaser D1. This tackles the deep-set fats that make their way to the surface as fatty spew. Let it air dry, or use a hair dryer to speed things up.

  3. Protect: Seal it all in with Geist Leather Preserver. While this won’t eliminate fatty spew forever, it gives the surface a protective shield and slows down future spew.

This quick routine is way more efficient than the constant blow-drying and wiping game – though keep in mind, humidity and temperature changes can encourage fatty spew to reappear over time.

When to Bring in the Pros

If the fatty spew keeps coming back, especially on porous or sensitive leathers, consider professional cleaning for a full solvent-based degreasing. And if you’re working with lots of leather goods (like bulk shipments), a professional approach can save you a lot of time and ensure your pieces stay spew-free.

The Science Behind Testing for Fatty Spew

Leather expert Gerber Andreas Ollert created a test for fatty spew:

  1. Pour 50-100 ml of water into a 500 ml lab beaker.
  2. Secure a piece of leather over the beaker’s opening, with the grain side up, using a rubber band.
  3. Heat the water for 2+ minutes to let steam rise through the leather.
  4. Remove the leather, dry the beaker, then re-wrap the leather airtight for 3-5 days at room temperature. No spew by the end? No long-term issue expected!

Weiterlesen →

Has Your Leather Sofa Become Your Cat’s New Plaything? No Problem – Let’s Fix It!

If your leather sofa has fallen victim to some “creative” scratching from your feline friend, don’t fret! With just a few easy steps and the right products, we can turn those claw marks into a distant memory.

Step 1: Get to Know Your Leather

Before diving in, let’s make sure we’re working with the right game plan. Here’s a quick test:

  • Pigmented Leather: Drip a bit of water on a hidden part. If it beads up on the surface, you’re working with pigmented leather (yay, a bit easier to manage!).
  • Porous Leather: If the water soaks in and darkens, it’s porous leather – approach with care.

Still not sure? Send us a quick photo, and we’ll help pinpoint the leather type and recommend the best products!

Fixing Superficial Scratches – Get Ready to Transform!

Scratches tend to pop out, don’t they? Lighter on dark leather, darker on light leather... But don’t worry, Geist Easy Colour Restorer is here to save the day!

  1. Degrease It: Start by giving the scratched area a quick clean with Geist Degreaser D1 – just a dab will do.
  2. Smooth It Out: Use the Geist Leather Sanding Pad to gently sand down any roughness for a smooth finish.
  3. Color Magic: Sponge on Geist Easy Colour Restorer to blend the color in seamlessly. Got a unique shade? Send us a sample, and we’ll whip up a custom color match for you!
  4. Set It to Dry: Grab a hairdryer and dry each layer in between for a smooth, polished look.

For tiny areas, dab on the color with a thin brush – Geist Easy Colour Restorer binds beautifully, making scratches disappear like magic.

Tackling Deeper Scratches – No Challenge Too Big

When those scratches are a bit rougher:

  1. Glue It Like a Pro: With a steady hand, apply a thin line of Geist Leather Glue using a needle and gently press the fibers down.
  2. Clean-Up Duty: Wipe away any extra glue with Geist Degreaser D1 to keep things looking neat.
  3. Trim, If Needed: If some leather fibers are still sticking up, give them a little trim with nail clippers – it’s all about the smooth finish.

Repairing the Really Deep Scratches – Almost Like a Sofa Spa Day!

For those extra-intense scratches and tiny tears:

  1. Fill the Gaps: Apply Geist Easy Filler for Leather & Vinyl to fill any gaps and give the damaged area a firm base.
  2. Dye for the Win: Once the filler has dried, finish it up with Geist Easy Colour Restorer to match the surrounding color – good as new!

Pro Tip: Most cat scratches are surface level, so you may not need the filler unless your cat really got in the zone!

Final Finishing Touches

While these steps can make scratches much less noticeable, a tiny scar may remain. But hey, we like to think of it as part of your sofa’s character! For heavy-duty cat enthusiasts who’ve left no leather unturned, consider replacing the leather panel if needed.

With a bit of patience, some top-notch products, and a can-do attitude, you’ll have your sofa looking sleek and scratch-free again. Your leather is ready to face another season of kitty shenanigans!

Weiterlesen →

The Art of Reviving leather Dashboards

Leather dashboards are like the crown jewels of a luxury car interior – a bold, beautiful centerpiece that makes you feel like you’re driving in the lap of luxury. But when wear and tear strikes, the repair process can turn into a real art form. Done right, a repair blends seamlessly; done wrong, and it’s like a bad haircut you can’t unsee. Here’s the lowdown on restoring those leather beauties and keeping them looking pristine.

Picking the Perfect Leather

Choosing leather for a dashboard isn’t just about picking something that looks good; it has to perform well too. Dark colors are your best friends here since they don’t create distracting glare on your windshield. So, if you’re eyeing a lighter shade, think twice – that fabulous cream color could end up making it harder to see the road! For the ultimate in low-glare class, we use a special matte finish that’s like a built-in shade filter. At Geist, we craft a custom leather top coat that keeps things luxe and low-key.

Tackling the Airbag Dilemma

Airbags add a unique twist to leather dashboards. You want a seamless, luxe look but with a quick breakaway for the airbag to deploy safely in a pinch. Leather thickness gets dialed down to a slim 0.45mm around airbag areas, ready to split open as needed – safety first, even in luxury!

Sticking with the Heat

Dashboards can reach desert-like temps, especially on a sunny day. To prevent any peeling or bubbling, a heat-resistant adhesive is essential. In some cases, the leather is even pre-shrunk to make sure it stays nice and snug once applied.

When Bubbles and Cracks Appear

Nothing spoils a sleek leather dashboard like an unsightly air bubble or a pesky crack. Air bubbles can sometimes be tackled with a bit of re-gluing, but don’t get too hopeful – dashboards can be picky about sticking down once they’ve lifted. Cracks, especially in warm climates, are another story; they’re best stabilized to prevent further spreading. Have a stubborn bubble or crack? Send us a photo, and we’ll help you decide if it can be salvaged or if it’s time to roll out the red carpet for a new piece.

With a bit of finesse, your leather dashboard can keep you riding in style, even after the years start to show. So, treat it right, drive happy, and keep your car looking like a million bucks!

Weiterlesen →

Embrace Autumn in Style with Suede & Nubuck Shoe Care Tips!

As the leaves turn and temperatures drop, it’s time to break out those cozy, stylish leather pieces: think soft nubuck boots, suede jackets, and sleek leather gloves. With their warm, velvety texture, suede and nubuck are perfect for fall – but they can be a bit high-maintenance in wet weather. Here’s how to protect your favorite cold-weather leather so it stays looking fabulous all season!

What Makes Suede & Nubuck So Special?

Suede and nubuck come from the soft side of the leather hide, giving them that unique, plush feel. Nubuck tends to be a bit finer, but both types bring an inviting warmth and sophistication. Unfortunately, they’re sensitive to water, grease, and fading – but no worries! With the right care, your leather goods will stay in top shape.

Protect First, Play Later!

Before stepping out in your new suede boots or nubuck jacket, give them some TLC with a few protective steps:

  • Geist Aniline Conditioner is your leather’s best friend! This spray keeps suede and nubuck supple, prevents drying, and helps preserve their color.
  • For a double layer of defense, follow up with Geist Fabric & Upholstery Protector. This powerful combo adds water resistance and helps keep stains at bay. Make a habit of treating your items within the first year and refreshing the protection regularly, based on how often you wear them.

The “Oops!” Kit for Suede & Nubuck Stains

Got a stain? No problem! Even if you missed the pre-treatment, there are ways to gently clean your favorite pieces:

  • Geist Suede & Nubuck Eraser – This magic eraser crumbles as it works, so it’s gentle while tackling dried stains.
  • Geist Leather Sanding Pad – For larger marks, this pad sands away dirt without harming the surface. Avoid liquid cleaners for small spots (they can cause the stain to spread!) and stick with these trusty tools.

For Stubborn Spots

If that stain’s still hanging on, Geist Degreaser D1 is your go-to. Just dab a small amount on a cloth and gently blot. For tricky fat or oil stains, a professional might be best, but Degreaser D1 often does the trick.

Washing & Waterproofing Suede and Nubuck

When your suede or nubuck pieces need a thorough clean, turn to Geist Rapid Leather & Vinyl Cleaner for a gentle, spa-like treatment. Just spritz it over the surface and let it work its magic—no scrubbing needed! This plant-based cleaner lifts dirt and grime, so after 5-10 minutes, you’ll only need a quick wipe with a damp cloth. Let it air dry in a cool spot, away from any sunlight or heaters, to keep that lush softness intact.

Once dry, finish with Geist Fabric & Upholstery Protector to shield your gear from water and stains, making it adventure-ready in any weather. Keep those suede and nubuck pieces looking flawless and fabulous, rain or shine!

Bring Back the Color

Is your suede looking a bit dull? Geist Easy Colour Restorer – Suede & Nubuck is a fantastic way to bring back the intensity of darker shades, especially for large pieces like furniture.

Keep It Classy All Season Long

With a bit of love and these easy care tips, your suede and nubuck will keep their rich, velvety look all season. While cleaning won’t make them brand-new, you can count on them staying stylishly polished. For super tough cases, a professional can always step in. Treat your leather with care, and it’ll reward you with years of fabulous wear!

Weiterlesen →

How to fix shiny leather on car seats

Leather can have either a glossy or matte finish, and which one is better depends on your personal preference and the intended use of the leather item. For example, modern leather car interiors typically feature a matte finish, while most leather shoes tend to have a glossy shine. However, daily wear and tear can cause matte leather to become shiny over time, especially in high-use areas like the driver's seat in cars.

The good news is that you can restore the original matte finish or even change a glossy leather item to a matte one, or vice versa. Here’s how to adjust the finish of leather and keep it looking its best.

How to Change Leather from Glossy to Matte or Matte to Glossy

Step 1: Clean the Leather Surface
To reduce the gloss on pigmented leather, start by cleaning the surface with Geist Rapid Leather & Vinyl Cleaner and a Geist Leather Cleaning Brush. This cleaning process will naturally reduce some of the shine. If the desired matte finish is achieved through cleaning alone, protect the leather with Geist Dye & Friction Blocker (3-6 months durability) or Geist Repel (12+ months durability) to maintain the finish and protect the leather from further wear and tear.

Step 2: Degrease the Leather
If cleaning doesn't remove enough gloss, the next step is to degrease the leather surface. Use Geist Degreaser D1 to completely dull the leather's surface. Degreasing will effectively remove oils and grease, which contribute to the leather's shine.

Step 3: Apply a Matte Finish
If additional dullness is required, or if you want to change the leather from glossy to matte, apply Geist Easy Colour Restorer Neutral Matt. This product allows you to adjust the level of gloss and can be applied using a sponge or a spray gun for a more even finish. Keep in mind, it’s easier to make leather glossy than to reduce shine. If you're working with large areas or want a perfectly uniform finish, we recommend seeking professional help, as a specialist can spray the product for a more even application.

Step 4: Protect the Leather Finish
To maintain a new matte finish, protect the leather with Geist Dye & Friction Blocker or Geist Repel. These products will help prevent further wear, shine, and damage to the surface of the leather.

The Science Behind Leather Gloss and Matte Finishes

If you look at leather under a microscope, you'll notice that the surface's texture plays a significant role in its gloss level. Matte leather has rougher, more defined edges that reflect less light, creating a dull finish. In contrast, smoother surfaces reflect more light, making the leather appear shinier. This explains why polishing or buffing leather increases its shine—by smoothing out the surface, you're reducing the shadows that would otherwise create a matte look.

By following these steps, you can easily restore or change the gloss level of your leather items, whether you prefer a shiny or matte finish.

Weiterlesen →

How to Remove Dye Stains from Leather Car Seats and Sofas

Dye transfer stains from clothing, especially denim, are a common issue on leather car seats and sofas. Lighter-colored leather shows these stains more visibly, and the longer the dye stays on the leather, the more difficult it is to remove. Here's how to effectively remove dye stains from leather, depending on the type of leather.

Best Way to Remove Dye Stains from Leather

If you have pigmented, monochrome, semi-gloss, or smooth leather, most dye stains can be removed with the right leather cleaning products. However, if the dye has penetrated the surface, you may need to use a dye restorer to repair the leather.

Follow these steps to remove dye stains:

  1. Start with Cleaning: Use Geist Rapid Leather & Vinyl Cleaner or Geist Rapid PRO Leather Cleaner for tougher stains. For best results, use a Geist Leather Cleaning Brush to work the cleaner deep into the leather grain. This step helps lift the dye from the surface without damaging the leather.

  2. Use Ink & Dye Remover for Stubborn Stains: If regular cleaning products don’t remove the stain, apply Geist Ink & Dye Remover. This plant-based formula is safe for leather, PU, and PVC surfaces. It removes dye transfer without damaging the top coating (clear coat) or altering the leather's finish.

    • Apply the remover and leave it to work for at least 30 minutes. For older or tougher stains, let it sit longer, or overnight if needed. Use a cotton bud to gently rub the stain and lift the dye. Avoid scrubbing too hard to prevent damage.
  3. Re-colour If Necessary: If the dye stain is still visible after cleaning, you may need to re-colour the affected area. Use Geist Easy Colour Restorer to match the original color. Contact us for a color match based on your sample.

  4. Protect the Leather: After cleaning, apply Geist Dye & Friction Blocker to protect the leather from future stains and discolouration. This product creates a protective barrier against abrasion, stains, and dye transfer. Use it every 3 to 6 months for maximum protection, especially on light-colored leather.

How to Remove Dye Stains from Faux Leather

The cleaning process for faux leather is the same as for real leather. If the dye transfer stains persist and cannot be removed, even recoloring may not completely fix the problem, as the dye may resurface.

Recommended Products for Removing Dye Stains on Leather:

By following these steps and using the recommended products, you can effectively remove dye stains from leather and faux leather, keeping your car seats and sofas looking pristine.

Weiterlesen →

Cleaning leather jackets and restoring the colour

How to Clean Leather Clothing

Leather clothing can get dirty, but unlike other garments, it’s important to use the right cleaners to avoid ruining the item. Without proper maintenance, leather can lose its quality and appearance.

Cleaning Leather Clothing

The Geist Rapid Leather & Vinyl Cleaner is an excellent maintenance cleaner for non absorbent leather garments. 

Many top grain leathers, such as motorcycle suits and jackets, have a pigmented protective coating that makes them waterproof and more resistant to fading and stains. These are easy to identify because moisture won’t penetrate or darken the leather. Minor scuffs and wear can be repaired with Geist Easy Colour Restorer. To prevent cracks and stains, apply Geist Leather Preserver twice a year.

Porous top grain leathers (aniline) are dyed through but have no coating, retaining their natural softness and flexibility. Moisture will penetrate and darken these types of leather. Aniline leather clothing should be treated with Geist Aniline Cream every 2-3 months to prevent water stains. Geist Aniline Conditioner revitalizes old aniline leather by adding softening oils, UV-filters, and intensifying dyes.

For suede and nubuck, light soiling can be removed with a Geist Leather Brush or Geist Nubuck Eraser. Treat suede and nubuck 1-2 times a year with Geist Aniline Conditioner, which protects against fading and dryness and helps restore colour after washing.

Repairing Leather Clothing

Scuffs or minor damage to smooth leather garments can be repaired using a Geist Leather Sanding Pad and Geist Easy Colour Restorer. Apply the product with a sponge on the damaged areas. For larger areas of fading or rips, consult a leather specialist.

Tears in suede or nubuck are often difficult to repair and may require replacement, depending on the extent of the damage.

Protecting Leather Clothing

The type of leather determines the best protection method. Smooth, pigmented leather should be treated 1-2 times a year with Geist Leather Preserver to keep it supple and protected from humidity.

Old and dry suede, nubuck, and aniline leather should be treated with Geist Aniline Conditioner 1-2 times a year to protect against aging and fading. Aniline leather should also be protected with Geist Fabric Protector.

These methods ensure that leather garments stay clean, protected, and last longer.

 

Weiterlesen →

Removing Ink, biro and pen marks from leather

Pen marks on leather can be frustrating, but it's essential to first identify the type of leather before attempting any cleaning, as incorrect methods can worsen the damage. Here are the various leather types and guidelines for removing pen marks:

  • Pigmented Leather: This type has a protective paint layer. Water won't penetrate the surface, and the leather usually has a grained, satin finish.
  • Aniline Leather: Porous and smooth, water will darken the leather as it absorbs.
  • Suede: The reverse side of smooth leather or split leather.
  • Nubuck: The sanded grain side of smooth leather with a velvety texture.
  • PU/Bycast/Bicast Leather: Split leather with a polyurethane film on the surface, often shiny and plastic-like.

Biro Marks on Leather

Pigmented Leather: Pen marks on pigmented leather are common but not always easy to remove, especially if older than three days. Older marks typically require re-colouring since ink penetrates the leather deeper over time. Be careful not to use the wrong product, which could worsen the issue.

For fresh marks, use Geist Ink & Dye Remover. Always test the product on a hidden area first. Apply the remover directly onto the pen marks or spread with a cloth, then leave it to lift the colour for at least 30 minutes, longer for older stains. Some heavy or older staining may need an overnight treatment. Many dyes visibly swim to the surface of the remover liquid, while others may need some rubbing with a cotton bud to lift them from the grain. The cotton bud will absorb the dye as it loosens it. Wipe off the remover with a dry, absorbent cloth and repeat the treatment if needed.

When the pen mark or dye is no longer visible, clean the surface with Geist Rapid Leather & Vinyl Cleaner or a moist cloth and leave it to dry.

Finally, protect the surface with Geist Dye & Friction Blocker or Geist Repel to prevent future discolourations and friction damage.

Aniline Leather: Due to its sensitivity and porous nature, removing pen marks from aniline leather should be done by a leather expert. Using Geist Ink & Dye Remover may cause more staining, and Geist Easy Colour Restorer is only suitable for one-tone leather. Consult a specialist for best results.

Suede or Nubuck: These materials are delicate, and removing pen marks is difficult. It's recommended to seek professional help. Testing in a hidden area and using a Geist Leather Sanding Pad can help, but be cautious. Colour repair is generally not possible.

PU or Bicast Leather: PU leather tends to be darker, making pen marks less noticeable. Always test in a hidden area first without too much pressure, as the surface can be easily damaged. Colour repairs are possible for monochrome leather.

Ink Stains on Leather

Pigmented Leather: The process for ink stains is the same as for biro marks. For smudges or spots, use Geist Ink & Dye Remover to dissolve the ink, followed by re-colouring with Geist Easy Colour Restorer. Protect the area with Geist Dye & Friction Blocker or Geist Repel

Aniline Leather: This type is highly sensitive due to its open pores. Ink removal should only be attempted by a professional.

Suede or Nubuck: Ink stains are difficult to remove from suede or nubuck. You can try using the Geist Leather Sanding Pad , but deeper stains often cannot be fixed. Professional help is advised.

PU or Bicast Leather: The same process as for pigmented leather applies.

Summary

Fresh ballpoint pen or biro marks on pigmented leather can be removed with Geist Ink & Dye Remover. For older or larger stains, Geist Ink & Dye Remover and possible re-colouring with Geist Easy Colour Restorer are required. Deep ink stains on smooth leather or marks on suede and nubuck are generally not removable without professional intervention.

Weiterlesen →

Cleaning and protecting leather handbags and accessories

Leather handbags can be very expensive but cleaning, restoring and maintaining them doesn’t have to cost the earth.

Geist range of leather care products offer an affordable DIY solution to clean, protect, maintain and repair leather handbags/accessories.

Vintage leather handbags from various animal species. Believe it or not they were once highly fashionable! 

The best things in life are free; the second best are expensive. — Coco Chanel.

 

Choose from two available kits for regular cleaning and protection of your valuable leather handbags:

  • Leather Goods Kit - Pigmented (non absorbent leather) which contains a mild but highly effective plant based leather cleaner and leather preserver, is recommended for gloss finishes
  • If the handbag is made of porous or absorbent leather like aniline leather, then go for Leather Goods Kit - Porous. It contains our plant based cleaner but also contains Aniline Cream which seals the surface and protects from spills and damage. 
  • If a gloss finish isn't required but protection from jeans, denim and dye transfer from other clothing is what you're after then Geist Repel is also a viable option. Only recommended for non absorbent leather, this long term coating protects leather surfaces against dye and friction damage for up to 12 months. 

Common Damages & Stains 

Water stains are the most common problems experienced by bag owners. It’s easy to leave a bottle of water, or any other drink, inside the bag with the cap loose. If the bag is aniline leather, suede or nubuck, liquid will stain on contact. For these sensitive leathers we always recommend treatment with the Geist Aniline Water Stain RemoverIn the case of some pigmented leathers, if the liquid has been in contact with the bag for a prolonged period, re-colouring with Geist Easy Colour Restorer will be required as the liquid would have had enough time to sink in and cause a permanent stain.  

Another common issue is pen and ink marks. These are not easy to clean and it will depend on the type of leather and how long ago the mark was caused. If the ink mark is fresh enough for removal, the Geist Ink & Dye Remover would be the product we recommend.  

Colour damage caused by friction (denim is the usual culprit), UV damage over time and regular wear can be refreshed and brought back to life with our leather colour restorer. Geist Easy Colour Restorer - a one step sponge on leather dye that can be mixed to exactly match the colour of your handbag!

Weiterlesen →

Wasserflecken auf Leder entfernen

Wasserflecken auf porösem Anilinleder lassen sich nur sehr schwer entfernen. Jeder normale Lederreiniger auf Wasserbasis macht das Leder nur noch nasser und verschlimmert den Fleck.

Mit dem Lederfixativ ist es möglich, Wasserflecken von Anilin-, Wildleder- und Nubuklederbekleidung effektiv zu entfernen. Der Vorteil der Reinigung von Lederbekleidung besteht darin, dass das Kleidungsstück in den meisten Fällen vollständig mit dem Leder- und Pelzwaschkonzentrat gewaschen werden kann. Dies trägt dazu bei, ein gleichmäßiges Ergebnis im gesamten Artikel zu erzielen, anstatt sich auf einen bestimmten Bereich zu konzentrieren.

Das Lederfixativ kann auch für empfindliche Anilinmöbel, Anilintaschen und Anilinschuhe verwendet werden. Für Wildleder- und Nubukschuhe haben wir den Schuhreiniger. Natürlich immer im Hinterkopf, dass jedes Stück Leder unterschiedlich auf die gleiche Behandlung reagieren kann. Wir können die vollständige Entfernung von Wasserflecken nicht garantieren, haben jedoch mit dieser Methode hervorragende Ergebnisse erzielt (siehe Fotos unten). 

Bei Wildleder- und Nubukledermöbeln lassen sich Wasserflecken nur schwer entfernen, tatsächlich lassen sie sich nur selten vollständig reinigen. Nach der Behandlung können jedoch deutliche Verbesserungen erzielt werden. 

 

Es ist sehr wichtig, die Anweisungen zum Auftragen des Lederfixiermittels zu befolgen. Sie sollten das Produkt immer zuerst an einer verdeckten Stelle testen. Tragen Sie das Fixiermittel mit Handschuhen und einem weichen Tuch von Naht zu Naht auf und achten Sie dabei auf eine gleichmäßige Anwendung. Stellen Sie sicher, dass alles vollständig nass ist. Bitte nicht zu stark reiben, da dies das Leder beschädigen könnte. Lassen Sie es trocknen oder verwenden Sie die Kaltstufe Ihres Haartrockners, um den Vorgang zu beschleunigen. Dieser Vorgang kann wiederholt werden, bis die Markierung nicht mehr sichtbar ist.

Sobald das Leder richtig getrocknet ist, ist es wichtig, es zu schützen. Wir empfehlen die Verwendung der Anilin-Creme, um neue Flecken auf neuen Lederartikeln zu verhindern. Für älteres Leder mit sichtbarer Patina eignet sich am besten der Elephant Leather Preserver. 

Bei Wildleder- oder Nubukmöbeln: Sobald der Bereich vollständig getrocknet ist, schleifen Sie die Oberfläche mit einem Lederschleifpad ab und tragen Sie Anilinschutz und Imprägniermittel auf, um sie vor weiteren Schäden zu schützen.

Kürzlich brachte uns ein Kunde eine Mulberry Piccadilly-Handtasche aus Eichen-Naturleder mit einem Wasserfleck, der einen großen Teil des Taschenbodens bedeckte. Sie hatte eine Flasche Wasser in den Beutel gesteckt, aber der Verschluss war nicht fest verschlossen und das Wasser lief in den Beutel hinein und hinterließ an der Außenseite einen sehr deutlichen Abdruck. Mulberry verkleidet diese Art von Taschen nicht, um das Leder innen und außen zu zeigen. Die Mulberry Piccadilly-Tasche wird von Mulberry außerdem unbehandelt gelassen, wodurch sie anfälliger für Flecken und Beschädigungen ist als behandelte Ledertaschen.

Die übliche Empfehlung für diese Art von Schäden wäre, den beschädigten Bereich oder sogar die gesamte Tasche neu zu färben. Allerdings sollte das Auftragen von Farben oder Lederfarbe bei der Bearbeitung von Anilinleder immer als letztes Mittel zum Einsatz kommen, da beim Auftragen der Farbe die Haptik und Griffigkeit des Leders verloren geht. Daher besteht unsere erste und bevorzugte Methode darin, Wasserflecken auf Anilinleder mit Lederfixativ zu behandeln.

So sah die Tasche vor der Behandlung aus, als wir sie in unsere Werkstatt brachten.

Mulberry Piccadilly handbag before

Schritt 1: Füllen Sie einen Eimer mit Wasser und dem Lederfixiermittel im Verhältnis 1:10

Schritt 2: Tauchen Sie den gesamten Beutel in die Lösung und wischen Sie die verschmutzten Stellen in regelmäßigen Abständen leicht mit der Lederreinigungsbürste ab. Lassen Sie es etwa 1 Stunde und 30 Minuten in der Lösung. 

Schritt 3: Füllen Sie einen weiteren Eimer mit Leder- und Pelzwaschkonzentrat und verdünnen Sie es mit Wasser im Verhältnis 1:8. Das Konzentrat ist ein flüssiges Reinigungsmittel, das reinigt und dabei hilft, Schmutz zu entfernen. Es enthält außerdem Öle, die dafür sorgen, dass das Leder nicht hart wird. Lassen Sie es einige Stunden in der Lösung und schrubben Sie es in regelmäßigen Abständen leicht. 

Schritt 4: Nehmen Sie den Beutel nach ein paar Stunden aus der Lösung und bewahren Sie ihn zum Trocknen an einem kühlen, trockenen Ort ohne Sonnenlicht und Hitze auf. Füllen Sie den Beutel mit einem alten Handtuch aus, um sicherzustellen, dass er seine Form nicht verliert und überschüssiges Wasser aufnimmt. Sprühen Sie während des Trocknungsprozesses in regelmäßigen Abständen Aniline Protector auf, um ein besseres Ergebnis zu erzielen. Dadurch wird sichergestellt, dass die Tasche während des Trocknungsprozesses nicht trocken und hart wird und das Leder weich und geschmeidig bleibt. 

Dies ist das Ergebnis nach dem Reinigungsvorgang. Ein sehr zufriedener Kunde mit einer sauberen Tasche!

Weiterlesen →